97 1 2 4 3 gu (general use) type sop series 1-channel (form a) with short circuit protection 4-pin type mm inch 4.4 0.2 .173 .008 2.1 0.2 .083 .008 4.3 0.2 .169 .008 features 1. short circuit protection when the output current exceeds a ?xed amount, it is cut and the off state is main- tained. the relay can be restored by turn- ing off the input current and then turning it back on. 2. so package 4-pin type in super min- iature design the device comes in a super-miniature so package 4-pin type measuring (w) 4.3 (l) 4.4 (h) 2.1 mm (w).169 (l) .173 (h) .083 inch approx. 70% of the volume and 70% of the footprint size of so package 6-pin type photomos re- lays. 3. tape and reel the device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automat- ic insertion machines. 4. controls low-level analog signals 5. low-level off state leakage current volume (4-pin) (6-pin) approx. 70% footprint approx. 70% typical applications ? telephone equipment ? modem ? measuring and testing equipment ? security equipment ? industrial equipment ? traf?c signal control types * indicate the peak ac and dc values. notes: (1) tape package is the standard packing style. also available in tube. (part no. suf?x x or z is not needed when orde ring; tube: 100 pcs.; case: 2,000 pcs.) (2) for space reasons, the initial letters of the product number aqy and s are ommited on the product seal. the package type indicator x and z are omitted from the seal. (ex. the label for product number aqy210ks is 210k). type output rating* part no. packing quantity in tape and reel load voltage load current picked from the 1/2-pin side picked from the 3/4-pin side 1 form a 1 form a ac/dc type 350 v 120 ma AQY210KSX aqy210ksz 1,000 pcs. rating 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) item symbol aqy210ks remarks input led forward current i f 50 ma led reverse voltage v r 3 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 75 mw output load voltage (peak ac) v l 350 v continuous load current (peak ac) i l 0.12 a power dissipation p out 300 mw total power dissipation p t 350 mw i/o isolatiom voltage v iso 1,500 v ac temperature limits operating t opr C40 c to +85 c C40 f to +185 f non-condensing at low temperatures storage t stg C40 c to +100 c C40 f to +212 f photomos relays
aqy210ks 98 2. electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 5 ma. for type of connection, see page 31. *turn on/turn off time item symbol aqy210ks condition input led operate current typical i fon 1.1 ma i l = 120 ma maximum 3.0 ma led turn off current minimum i foff 0.3 ma i l = 120 ma typical 1.0 ma led dropout voltage typical v f 1.13 v (1.32 v at i f = 50ma) i f = 5 ma maximum 1.5 v output on resistance typical r on 23.5 w i f = 5 ma i l = 120 ma within 1 s on time maximum 35 w off state leakage current maximum i leak 1 m a i f = 0 ma v l = 350 v over current protection cut off current minimum i shut 160 ma i f = 5 ma within 20ms on time typical 200 ma maximum 240 ma detection time typical t shut 50 m s i f = 5 ma v l = 350v dc short circuit transfer characteristics turn on time* typical t on 0.7 ms i f = 5 ma i l = 120 ma maximum 2 ms turn off time* typical t off 0.07 ms i f = 5 ma i l = 120 ma maximum 1 ms i/o capacitance typical c iso 0.8 pf f = 1 mhz v b = 0 maximum 1.5 pf initial i/o isolation resistance minimum r iso 1,000 m w 500 v dc toff input output ton 90% 10% reference data 1. load current vs. ambient temperature char- acteristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f 2. on resistance vs. ambient temperature char- acteristics measured portion: between terminals 3 and 4; led current: 5 ma; load voltage: max. (dc) load current: max.(dc) 3. turn on time vs. ambient temperature char- acteristics measured portion: between terminals 3 and 4; led current: 5 ma; load voltage: 10v (dc); continuous load current: max.(dc) 0 60 80 140 0 204060 80 85 100 ?0 ?0 40 20 100 120 ambient temperature, c load current, ma 0 10 20 30 40 50 02040608085 ?0 ?0 ambient temperature, c on resistance, 0 2 3 ?0 ?0 5 0204060 80 1 4 85 ambient temperature, c turn on time, ms n for dimensions, see page 28. n for schematic and wiring diagrams, see page 31. n for cautions for use, see page 36.
aqy210ks 99 4. turn off time vs. ambient temperature char- acteristics led current: 5 ma; load voltage: max.(dc); continuous load current: max.(dc) 5. led operate current vs. ambient tempera- ture characteristics load voltage: max.(dc); continuous load current: max.(dc) 6. led turn off current vs. ambient temperature characteristics load voltage: max.(dc); continuous load current: max.(dc) turn off time, ms 0 0.2 0.3 ?0 ?0 0.5 0204060 80 85 0.1 0.4 ambient temperature, c 0 1 2 3 ?0 ?0 5 0204060 80 85 4 led operate current, ma ambient temperature, c led turn off current, ma ambient temperature, c 0 2 1 3 ?0 ?0 5 0204060 80 85 4 7. led dropout voltage vs. ambient tempera- ture characteristics led current: 5 to 50 ma 8. voltage vs. current characteristics of output at mos portion measured portion: between terminals 3 and 4; ambient temperature: 25 c 77 f 9. off state leakage current measured portion: between terminals 3 and 4; ambient temperature: 25 c 77 f 1.0 0 1.1 1.2 1.3 ?0 ?0 0204060 80 1.4 1.5 85 100 led dropout voltage, v ambient temperature, c 50ma 30ma 20ma 10ma 5ma ?00 200 150 100 50 0 ?0 ?00 ?50 2 046 ? ? ? voltage,v current, ma off state leakage current, a load voltage, v 80 60 40 20 10 ?1 10 ?2 10 ? 10 ? 10 ? 10 ? 0 100 10. led forward current vs. turn on time char- acteristics measured portion: between terminals 3 and 4; load voltage: max.(dc); continuous load current:max.(dc); ambient temperature: 25 c 77 f 11. led forward current vs. turn off time char- acteristics measured portion: between terminals 3 and 4; load voltage: max.(dc); continuous load current:max.(dc); ambient temperature: 25 c 77 f 12. applied voltage vs. output capacitance characteristics measured portion: between terminals 3 and 4; frequency: 1 mhz; ambient temperature: 25 c 77 f turn on time, ms led forward current, ma 0 0.5 1 10 0203040 1.5 50 turn off time, ms led forward current, ma 0 0.05 0.15 0.1 10 0203040 0.2 50 output capacitance, pf applied voltage, v 0 50 20 10 30 40 50 100 150 200 0 13. cut off current vs. ambient temperature characteristics measured portion: between terminals 3 and 4; led current: 5 ma, within 20ms on time 14. detection time vs. ambient temperature characteristics measured portion: between terminals 3 and 4; led current: 5 ma; load voltage: max.(dc); ambient temperature, c cut off current, ma 0 100 50 150 200 ?0 ?0 300 0204060 80 85 250 detection time, s ambient temperature, c 0 100 50 150 200 ?0 ?0 300 0204060 80 85 250
aqy210ks 100 what is short circuit protection? when the load current exceeds speci?ca- tions, the short circuit protection function kicks in and completely cuts off the load current, thus turning off the relay. the short circuit protection inside the photomos relay instantaneously (typ. 50 s) and completely cuts of the load current. this protects any circuits that follow the photomos relay from excess current. there is almost no heating of the photo- mos relay, which prevents it from becom- ing damaged. to restore the function of the relay turn off the input current and then turn it back on. output voltage and output current characteristics v-i characteristics of photomos relay with short circuit protection circuit output voltage output current operation chart relay input current relay output current 5ma 120ma 0 0 detection time (approx. 50 s) normal relay operation occurrence of short circuit current abnormal current the short circuit current detection device latches when the relay is off. the relay operates normally when the input current is reset. if the output section shorts even after the input current is reset, it will latch when the short circuit current is detected again and the relay turns off. 5/7/2001 all rights reserved, ? copyright matsushita electric works, ltd. go to online catalog
|
